Tachogenerators/Resolvers
Product selection
| Product | Sample picture | Housing | Open-circuit voltage | Shaft | Features |
|---|---|---|---|---|---|
 |
|
|
|
|
|
|
GMP 1,0 Tachogenerators |
 |
ø110 mm | 40...175 mV per rpm | ø12...14 mm |
High response speed Recognition of sense of rotation Patented LongLife technique With own bearings |
|
GT 5 Tachogenerators |
 |
ø52 mm | 7...10 mV per rpm | ø8...12 mm end shaft |
High response speed Recognition of sense of rotation Patented LongLife technique No auxiliary energy source required |
|
GT 7.08 Tachogenerators |
 |
ø70 mm | 10...60 mV per rpm | ø12...16 mm end shaft |
High response speed Patented LongLife technique No auxiliary energy source required Low moment of inertia |
|
GT 7.16 Tachogenerators |
|
ø70 mm | 10...60 mV per rpm | ø12...16 mm end shaft |
High response speed Patented LongLife technique No auxiliary energy source required Low moment of inertia |
|
GT 9 Tachogenerators |
 |
ø89 mm | 10...20 mV per rpm |
ø12...16 mm end shaft ø17 mm cone shaft 1:10 |
High response speed Recognition of sense of rotation Patented LongLife technique No auxiliary energy source required |
|
GTB 9 Tachogenerators |
 |
ø95 mm | 10...20 mV per rpm |
ø12...16 mm end shaft ø17 mm cone shaft 1:10 |
High response speed Recognition of sense of rotation Patented LongLife technique No auxiliary energy source required High protection standard IP 68 |
|
GTF 7.08 Tachogenerators |
 |
ø75 mm | 10...60 mV per rpm | ø11 mm |
High response speed Patented LongLife technique No auxiliary energy source required Low moment of inertia EURO flange B10 |
|
GTF 7.16 Tachogenerators |
|
ø75 mm | 10...60 mV per rpm | ø11 mm |
High response speed Patented LongLife technique No auxiliary energy source required Low moment of inertia EURO flange B10 |
|
GTR 9 Tachogenerators |
 |
ø95 mm | 20...60 mV per rpm | ø16 mm end shaft |
High response speed Recognition of sense of rotation Patented LongLife technique No auxiliary energy source required |
|
KTD 2-... B14 Tachogenerators |
 |
ø54 mm | 7...15 mV per rpm | ø6 mm |
Synchro flange High response speed Recognition of sense of rotation |
